ZD10LCD 10A Stepper Motor Controller with 1/128 microstep resolution, 4 button user interface & LCD screen
The ZD10LCD is a stepper motor controller with built in user interface capable of up to 10A and has a range of customisable options. Scroll down to customise yours now. Please note we will select the best possible microstepping resolution for the speed range specified unless you let us know otherwise. Default speed range settings are 0-300rpm.
|10 - 25||5 %|
|26 - 50||10 %|
|51 - 100||15 %|
|101 - 250||18 %|
|251 - 500||20 %|
|501 - 1000||30 %|
Introduction—an overview of the main features on the ZD10LCD…
Get your project started with a 10A Stepper Motor Controller with LCD display screen and 4 button user interface
The ZD10LCD 10A stepper motor controller with LCD display screen is an intelligent stepper motor controller designed and manufactured in the UK by Zikodrive Motor Controllers. The ZD10LCD is available with a standard programme but comes into its own when set up with a custom programme. The Boxer iD Stepper Motor Driver case study provides a good example of what is possible with the ZD10LCD.
You can select some of these options when purchasing direct from zikodrive.com but if you need something more bespoke please contact us to discuss.
A stepper motor controller and PLC in one.
The ZD10LCD stepper motor controller with LCD display screen is capable of operating in a large number of applications including pumps and process control applications and laboratory applications. The onboard processor allows the ZD10LCD to be setup in a number of ways – either as a real time simple stepper motor controller or using more complex calibration features. If you’ve got an application where you need to run a handful of sequences at the press of a button the ZD10LCD can be setup to do so. We can modify the company name, programme names and anything you require to get the unit working for you and delivering brand consistency.
Easy to mount
The mounting holes on the ZD10LCD enable easy mounting to NEMA 23 stepper motors and Zikodrive supply the ZD series with a range of stepper motors offering a torque range from 0.65Nm right up to 3Nm. Key specifications for the ZD10LCD can be found on page 1 of the datasheet but the most notable are the option of up to 1/128 microstepping, the onboard memory (allowing a range of customised programmes to be stored) and the power ratings (up to 35v and 10A).
PLEASE NOTE: if you have a specific programming requirement, project or application in mind then please get in touch with one of our engineers to discuss your requirements as we can pre-programme our controllers to suit a wide range of requirements.
The maximum speed and the microstep resolution on the ZD10LCD 10A stepper motor controller are closely related and, depending on the choice of motor you make, it may not be possible to achieve both the microstep resolution you require and the top speed you require. In order to make this as simple as possible for you, the customer, we will introduce the highest possible microstep resolution within the speed parameters you specify (unless requested otherwise).
|Dimensions||7 x 7 x 4 cm|
Full Step, Half Step, Quarter Step, 1/8 step, 1/16 microstep, 1/32 microstep, 1/64 microstep, 1/128 microstep
|0-5v Analogue Input||