What Is An Optimised Sensorless Brushless DC Motor Controller And What Are The Main Advantages Of Using Them?

Optimised Sensorless Brushless Motor Controllers Deliver Perfect Performance

An optimised sensorless brushless DC motor controller is a standard sensorless BLDC motor controller supplied pre-programmed with optimised firmware for your specific application. The process for this involves us working with the specific motor you have and testing it extensively in (as close to) the actual operating conditions as possible. 

Once we have done this we can then optimised various aspects of the motor performance in order to deliver a range of significant improvements that will ensure long lasting reliability and excellent performance.

What Factors are Optimised?

Typically (although not always) the most problematic area of performance will be the start up of the motor. Getting this reliable, smooth and consistent often requires a specifically tuned startup programme. There are a huge number of factors which can impact on the required optimisation including the inertia of the application, the specification of the motor, the power available and more.

Specification points with the motors such as inductance, number of poles and max speed all have an impact. However, equally important are application specific factors such as the operating temperature, startup inertia and energy usage limits. 

The critical aspect is that optimising the controller allows it to adequately meet all of the specification points required for your application.

Optimised Versus UN-Optimised Sensorless Brushless DC Motor Control

Optimised Brushless Motor Controllers are More Energy Efficient

The optimisation process involves tailoring the controller to the specific motor and specific application that is required. This means that the timing and operation of the controllers are perfectly setup and therefore perfectly optimised to use the minimum required energy for the application.

This has two major benefits – firstly the controller is as energy efficient as possible which is something all industry is now aiming towards. Secondly – poor energy efficiency typically makes itself known in the form of excess heat which can be very damaging both for the motor and controller but also for the wider application.

Thinking of Getting an Optimised Brushless Motor Controller for your Specific Motor and Your Specific Application?

If you’re thinking of exploring the idea of an optimised brushless motor controller then there are two main options for how to go about doing this. The first is to use our online quote request form to get a quote for the number of controllers you will need. We don’t charge for the initial optimisation but it may be that if you want to add a few more features to the custom programme that we have to incur a small fee to do so. This will only be small and is simply a reflection of the time taken to carry out the additional work. 

In order to carry out the optimisation we will need to receive a sample of the motor and/or product that you are using in order to get an idea of the key operating criteria required. We can then setup the controller as required to get the best possible performance out of your controller. We will then return the sample motor / assembly as requested by you. 

On some occasions it is possible to do the optimisation process remotely if you are able to provide access to a video link to the motor / controller setup you have and are also able to work with our tech team to programme the controller with the firmware we send through. 

This process is less preferable to getting the samples sent into our in house team but can be done where time is short or where it is not possible to send out samples. Please get in touch with us to discuss your project if this is something that you would like to explore.

Ok, I think I understand, so how does this work in practice?

In practice, we will request a sample of the motor that you are using or are wanting to use and will also request details of the application that you are using the motor in (we are always happy to sign NDAs as required). Once we understand this we will then be able to optimise all aspects of the controller to deliver the maximum possible mechanical performance and the most energy efficient performance from the motor.

We do this by profiling the motor and application based on the number of poles, the inertia at startup, the inductance of the coils in the motor and other factors such as top speed, acceleration required and more. Once we understand all of these we can then programme the brushless motor controller that you have chosen to deliver the exact performance you require.

This Sounds Good, But How Will I Use It?

In practice, optimising a brushless motor controller can deliver significantly improved performance most notably in sensorless brushless applications where issues are arising with the startup phase and also the general running of the motor. Parts of this improvement are akin to getting the timing exactly right on an internal combustion engine. If one cylinder is misfiring or the timing is marginally out then the point at which the force is applied will not be the optimum point. This then leads to a situation in which the power will not only be wasted but will actually then start to work against the engine.

In many respects a brushless motor and controller are similar. By understanding the application requirements and the key specifications of the motor we can ensure that power is applied in the most efficient manner possible to deliver the output that is required.

How Much Does It Cost?

We now offer this service completely free provided that you have a motor sample that you can send to us for testing. 

Simply purchase the relevant motor controller from us (if you’re not sure on the best option please contact us to discuss), send us a sample of the motor you’re using and we will then optimise the controller to the motor. We will try and arrange a quick call to go through the application details as this can have an impact on the optimisation process. Once done, we’ll ship everything back to you to get you started.

If you need to order more controllers in future the process could not be simpler. Once you confirm you’re happy with the setup we will assign a unique part number. Whenever you need any more units simply email a purchase order through with the relevant part number or order online using your account and we will send the units out pre-programmed and ready to use.

Was ist ein optimierter, sensorloser, bürstenloser DC-Motorcontroller und welche Vorteile ergeben sich daraus?


Optimierte sensorlose bürstenlose Motorsteuerungen liefern perfekte Leistung

Eine optimierte sensorlose bürstenlose Gleichstrommotorsteuerung ist eine standardmäßige sensorlose BLDC-Motorsteuerung, die mit einer für Ihre spezifische Anwendung optimierten Firmware vorprogrammiert geliefert wird. Der Prozess hierfür beinhaltet, dass wir mit dem spezifischen Motor arbeiten, den Sie haben, und ihn ausführlich (so nahe wie möglich) an den tatsächlichen Betriebsbedingungen testen.

Sobald wir dies getan haben, können wir verschiedene Aspekte der Motorleistung optimieren, um eine Reihe von signifikanten Verbesserungen zu erzielen, die eine dauerhafte Zuverlässigkeit und eine hervorragende Leistung gewährleisten.





Welche Faktoren werden optimiert?

Typischerweise (wenn auch nicht immer) ist der Motorstart der problematischste Leistungsbereich. Um dies zuverlässig, reibungslos und konsistent zu erreichen, ist häufig ein speziell abgestimmtes Startprogramm erforderlich. Es gibt eine Vielzahl von Faktoren, die sich auf die erforderliche Optimierung auswirken können, darunter die Trägheit der Anwendung, die Spezifikation des Motors, die verfügbare Leistung und vieles mehr.

Spezifikationspunkte mit den Motoren wie Induktivität, Anzahl der Pole und maximale Drehzahl wirken sich alle aus. Ebenso wichtig sind jedoch anwendungsspezifische Faktoren wie Betriebstemperatur, Anlaufträgheit und Energieverbrauchsgrenzen.

Der entscheidende Aspekt ist, dass durch die Optimierung des Controllers alle für Ihre Anwendung erforderlichen Spezifikationspunkte angemessen erfüllt werden können.






Optimierte versus UN-optimierte sensorlose bürstenlose Gleichstrommotorsteuerung



Optimierte bürstenlose Motorsteuerungen sind energieeffizienter

Der Optimierungsprozess umfasst das Anpassen der Steuerung an den spezifischen Motor und die spezifische Anwendung, die erforderlich sind. Dies bedeutet, dass das Timing und der Betrieb der Steuerungen perfekt eingestellt und daher perfekt optimiert sind, um die minimal erforderliche Energie für die Anwendung zu nutzen.

Dies hat zwei Hauptvorteile: Erstens ist die Steuerung so energieeffizient wie möglich, was die gesamte Industrie jetzt anstrebt. Zweitens: Eine schlechte Energieeffizienz macht sich typischerweise in Form von überschüssiger Wärme bemerkbar, die sowohl für den Motor als auch für die Steuerung, aber auch für die breitere Anwendung sehr schädlich sein kann.





Denken Sie darüber nach, eine optimierte bürstenlose Motorsteuerung für Ihren spezifischen Motor und Ihre spezifische Anwendung zu erhalten?

Wenn Sie die Idee einer optimierten bürstenlosen Motorsteuerung untersuchen möchten, gibt es zwei Hauptoptionen, wie Sie dies tun können. Das erste besteht darin, unser Online-Angebotsanforderungsformular zu verwenden, um ein Angebot für die Anzahl der Controller zu erhalten, die Sie benötigen. Für die anfängliche Optimierung wird keine Gebühr erhoben. Wenn Sie dem benutzerdefinierten Programm jedoch einige weitere Funktionen hinzufügen möchten, fällt möglicherweise eine geringe Gebühr an. Dies wird nur klein sein und spiegelt lediglich die Zeit wider, die für die Durchführung der zusätzlichen Arbeiten benötigt wird.

Um die Optimierung durchführen zu können, benötigen wir ein Muster des von Ihnen verwendeten Motors und / oder Produkts, um eine Vorstellung von den wichtigsten erforderlichen Betriebskriterien zu erhalten. Wir können den Controller dann nach Bedarf einrichten, um die bestmögliche Leistung Ihres Controllers zu erzielen. Wir werden dann den von Ihnen angeforderten Mustermotor / die Musterbaugruppe zurücksenden.

In einigen Fällen ist es möglich, den Optimierungsprozess remote durchzuführen, wenn Sie Zugriff auf eine Videoverbindung zu Ihrem Motor- / Controller-Setup haben und mit unserem Tech-Team zusammenarbeiten können, um den Controller mit der von uns gesendeten Firmware zu programmieren durch.

Dieser Vorgang ist dem Senden der Proben an unser internes Team weniger vorzuziehen, kann jedoch durchgeführt werden, wenn die Zeit knapp ist oder wenn es nicht möglich ist, Proben zu versenden. Bitte setzen Sie sich mit uns in Verbindung, um Ihr Projekt zu besprechen, wenn Sie dies untersuchen möchten.



Ok, ich glaube ich verstehe, wie funktioniert das in der Praxis?

In der Praxis fordern wir ein Muster des Motors an, den Sie verwenden oder verwenden möchten, und fordern auch Details der Anwendung an, in der Sie den Motor verwenden (wir unterschreiben gerne bei Bedarf NDAs). Sobald wir dies verstanden haben, können wir alle Aspekte der Steuerung optimieren, um die maximal mögliche mechanische Leistung und die energieeffizienteste Leistung des Motors zu erzielen.

Dazu profilieren wir den Motor und die Anwendung anhand der Polzahl, der Trägheit beim Start, der Induktivität der Spulen im Motor und anderer Faktoren wie Höchstgeschwindigkeit, erforderliche Beschleunigung und mehr. Sobald wir all dies verstanden haben, können wir den von Ihnen ausgewählten bürstenlosen Motorcontroller so programmieren, dass er genau die Leistung liefert, die Sie benötigen.




Das hört sich gut an, aber wie werde ich es verwenden?

In der Praxis kann die Optimierung einer bürstenlosen Motorsteuerung zu einer erheblich verbesserten Leistung führen, insbesondere bei sensorlosen bürstenlosen Anwendungen, bei denen Probleme mit der Startphase und dem allgemeinen Betrieb des Motors auftreten. Teile dieser Verbesserung sind vergleichbar damit, dass das Timing eines Verbrennungsmotors genau richtig eingestellt wird. Wenn ein Zylinder nicht zündet oder der Zeitpunkt geringfügig abweicht, ist der Punkt, an dem die Kraft ausgeübt wird, nicht der optimale Punkt. Dies führt dann zu einer Situation, in der die Energie nicht nur verschwendet wird, sondern tatsächlich anfängt, gegen den Motor zu arbeiten.

In vielerlei Hinsicht sind ein bürstenloser Motor und eine bürstenlose Steuerung ähnlich. Durch das Verständnis der Anwendungsanforderungen und der wichtigsten Spezifikationen des Motors können wir sicherstellen, dass die Leistung so effizient wie möglich angelegt wird, um die erforderliche Leistung zu erzielen.






Wie viel kostet es?

Wir bieten diesen Service jetzt völlig kostenlos an, vorausgesetzt, Sie haben ein Motormuster, das Sie uns zum Testen senden können.

Kaufen Sie einfach die entsprechende Motorsteuerung bei uns (wenn Sie sich nicht sicher sind, welche Option am besten geeignet ist, kontaktieren Sie uns bitte, um dies zu besprechen), senden Sie uns ein Muster des von Ihnen verwendeten Motors, und wir optimieren dann die Steuerung für den Motor. Wir werden versuchen, einen kurzen Anruf zu arrangieren, um die Anwendungsdetails durchzugehen, da dies Auswirkungen auf den Optimierungsprozess haben kann. Sobald dies erledigt ist, senden wir Ihnen alles zurück, damit Sie loslegen können.

Wenn Sie in Zukunft mehr Steuerungen bestellen müssen, könnte der Vorgang nicht einfacher sein. Sobald Sie bestätigen, dass Sie mit dem Setup zufrieden sind, weisen wir Ihnen eine eindeutige Teilenummer zu. Wenn Sie weitere Einheiten benötigen, senden Sie einfach eine Bestellung per E-Mail mit der entsprechenden Teilenummer oder bestellen Sie online über Ihr Konto. Wir senden die Einheiten vorprogrammiert und einsatzbereit aus.