+44 (0) 333 123 7130
•The ZDSPN12318 is a NEMA 23 stepper motor with an integrated ZDSP stepper motor controller offering 0-
•The ZDSPN2318 NEMA 23 stepper motor with integrated controller features a 24bit speed resolution which allows up to 16,777,215 possible speed increments for the motor.
•Speed control on the ZDSPN2318 can be managed via Onboard 23 turn trim potentiometer, 0-
•Selectable Acceleration settings on the ZDSP stepper motor controller mean that the ZDSPN2318 stepper motor package can be optimised to start under load or run a customised start up sequence.
•The ZDSPN2318 stepper motor can be set up with a range of step resolutions in Full step, Half Step, Quarter Step of 1/16 Step depending on your project’s needs.
•Voltage input polarity protection is included in the ZDSPN2318 to prevent damage caused by mistakenly connecting power inputs the wrong way around. The ZDSPN2318 also includes over temperature protections which shut the board down if it begins to overheat. This protects the stepper motor and the stepper motor driver.
•The ZDSPN2318 is small, flexible and compact and the ZDSP stepper motor driver can be mounted on the rear or removed and mounted separately as required.
The ZDSPN2318 is a compact but powerful NEMA 23 stepper motor with integrated controller offering up to 1.36Nm of torque and exceptionally fine speed resolution. The onboard ZDSP stepper motor controller can be operated using analogue 0-
Don’t forget that for specific projects or applications it is also possible for us to develop a specific programme to perform the required function and we can also offer custom built user interfaces to control the board as required. This flexibility makes the ZDSPN2318 a great choice for a number of applications including (but not limited to) the following:
1. Pumps -
2. Laboratory Equipment -
3. Industrial Equipment
IF YOU HAVE ANY OTHER IDEAS OR REQUIREMENTS YOU CAN TALK TO ONE OF OUR ENGINEERS ON +44 (0) 333 123 7130 OR ALTERNATIVELY USE THE CONTACT FORM OPPOSITE.
An intelligent NEMA 23 stepper motor and driver package capable of up to 1.36Nm of torque and based on a standard 1.8 degree NEMA 23 stepper motor. The ZDSPN2318 is fully programmable and can be set up to work well in a huge range of applications. As a 1.8 degree stepper motor the system has 200 steps but with the microstepping resolution on the ZDSP this can be taken up to 3200. This enables the unit to operate more smoothly, particularly at lower speeds. This stepper motor with integrated controller is especially useful for those customers who require a small package which is flexible and powerful.
+44 (0) 333 123 7130
Frequently Asked Questions
|How We Work|
|Who we work with|
|Integrated Motors and Controllers|
|Stepper Motor Controller Design|
|Brushless Motor Controller Design|
|POS and Retail|