+44 (0) 333 123 7130
•The ZDSPN1718 is a NEMA 17 stepper motor with an integrated ZDSP stepper motor controller offering 0-
•The ZDSPN1718 NEMA 17 stepper motor with integrated controller features a 24bit speed resolution which allows up to 16,777,215 possible speed increments from the motor.
•Speed control on the ZDSPN1718 can be managed via Onboard 23 turn trim potentiometer, 0-
•Selectable Acceleration settings on the ZDSP stepper motor controller allow the ZDSPN1718 stepper motor package to be optimised to start under load or operate a custom start up sequence.
•The ZDSPN1718 stepper motor can be set up with selectable step resolutions of Full step, Half Step, Quarter Step of 1/16 Step depending on your needs.
•Voltage input polarity protection is included in the ZDSPN1718 to prevent damage caused by power inputs being mistakenly connected the wrong way around. It also includes over temperature protections which will shut the board down if it begins to overheat.
•The ZDSPN1718 is small, flexible and compact and the ZDSP stepper motor driver can be mounted on the rear or removed and mounted separately as required.
The ZDSPN1718 is a compact but powerful NEMA 17 stepper motor with integrated controller offering up to 0.65Nm of torque and exceptionally fine speed resolution. The onboard ZDSP stepper motor controller can be operated using analogue 0-
Don’t forget that for specific applications it is also possible for us to develop a specific programme to perform the required function and we can also offer custom built user interfaces to control the board as required. This flexibilty makes the ZDSPN1718 a great option for a number of applications including the following:
1. Pumps -
2. Laboratory Equipment -
3. Industrial Equipment
IF YOU HAVE ANY OTHER IDEAS OR REQUIREMENTS YOU CAN TALK TO ONE OF OUR ENGINEERS ON +44 (0) 1422 413673 OR ALTERNATIVELY USE THE CONTACT FORM OPPOSITE.
An intelligent stepper motor and driver package capable of up to 2A and 30v of power and based on a standard 1.8 degree NEMA 17 stepper motor. The ZDSPN1718 is fully programmable and can be set up to deal with a huge number of applications. As a 1.8 degree stepper motor the system has 200 steps but with microstepping this can be taken up to 3200. This enables the unit to operate more smoothly, particularly at lower speeds. This stepper motor with integrated controller has numerous applications and is especially useful for those customers who require a small package which is flexible and powerful.
+44 (0) 333 123 7130
Frequently Asked Questions
|How We Work|
|Who we work with|
|Integrated Motors and Controllers|
|Stepper Motor Controller Design|
|Brushless Motor Controller Design|
|POS and Retail|