+44 (0) 333 123 7130
•The ZD10N2347GB is a geared NEMA 23 stepper motor with an integrated ZD10 stepper motor controller offering 0-
•The ZD10N2347GB NEMA 23 geared stepper motor with integrated controller features up to 1/128 microstep resolution which provides exceptional positional accuracy and can also be used to increase smoothness.
•Speed control on the ZDSPN2347GB can be operated via 0-
•Selectable Acceleration settings on the ZD10 stepper motor controller allow the ZD10N2347GB geared stepper motor to be setup to start under heavy load or to run a customised start up sequence specifically programmed for your application or project.
•Voltage input polarity protection is included in the ZD10N2347GB to prevent damage caused by power inputs being mistakenly connected in reverse. The ZD10N2347GB also includes a range of other protections including over temperature and over current protections which will shut the ZD10 Stepper Motor Controller down if it begins to overheat or use too much current.
•The ZD10N2347GB is a compact and flexible package designed to deliver exceptional torque for its size. TheZD10 stepper motor driver can be mounted directly onto the rear of the motor or removed and mounted separately as required. Please advise before ordering on how you would like this to be set up.
The ZD10N2347GB is a compact but powerful NEMA 23 geared stepper motor with integrated stepper motor controller delivering up to 40Nm of torque and exceptionally fine microstep resolution. The onboard ZD10 stepper motor controller can be easily controlled in a variety of ways by using analogue 0-
The ZD10 can also be controlled via UART where more in depth control is required.
Never forget that if you have a specific applications requirement it is also possible for us to setup a specific programme to perform the required function.
In addition to this we can also offer custom built user interfaces to control the board as required. If you have a need for a complete solution for a particular application (this could include power supplies, external pots and more) then please CLICK HERE for more information or get in touch as we would be very happy to help.
The flexibility of the controller as well as the range of additional services offered makes the ZD10N2347GB the perfect option for a large number of applications including the following:
1. Industrial Equipment
2. Point of sale equipment.
3. Models and other types of system.
4. Rotating turntables and stands.
IF YOU HAVE ANY OTHER IDEAS OR REQUIREMENTS YOU CAN TALK TO ONE OF OUR ENGINEERS ON +44 (0) 333 123 7130 OR ALTERNATIVELY USE THE CONTACT FORM ON THE OPPOSITE PAGE.
An intelligent stepper motor and driver package capable of up to 40Nm of torque in a very small package. The ZDSPN2347GB package offers up to 300w of power and is based on a standard 1.8 degree NEMA 23 geared stepper motor which runs at high torque at low speeds.
The ZDSPN2347GB is fully programmable and is designed specifically for low speed, high torque, small package applications. This geared stepper motor with integrated controller has numerous applications and is especially useful for those customers who require a small package which is powerful and offers much higher torque than would normally be found in this size of unit..
+44 (0) 333 123 7130
Frequently Asked Questions
|How We Work|
|Who we work with|
|Integrated Motors and Controllers|
|Stepper Motor Controller Design|
|Brushless Motor Controller Design|
|POS and Retail|